1.Anti-blocking
Blockage of sewer pipes is very common. One of the causes of blockage is that foreign objects get stuck in part of the pipeline. Blocked water pipes not only cause trouble to our lives, but also cause excessive pressure on the water pipes and affect the life of the water pipes. To avoid clogging, we can add a floor drain at the drain nozzle to prevent excessive foreign objects from entering the pipeline.
2. Anti-pressure
Although the hardness of polyethylene on the pipeline is constantly increasing, it will also be subject to excessive external pressure, resulting in burst leakage. Therefore, when installing the duct, try to install the duct on the top of the room, not only to avoid the burst leakage of the duct caused by heavy objects, but also to avoid the heavy cost of hitting the ground to maintain the duct during the leak.
3. Sunscreen and cold protection
Long-term exposure will not only cause the polyethylene to aging the pipe and reduce its performance, but also because the sunlight penetrates the pipe wall, providing conditions for the reproduction of a large number of microorganisms, causing the pipe to be covered with a lot of moss, affecting the use. Plastic becomes brittle in cold weather, and if the water in the pipe freezes, it will burst the pipe. In order to prevent the pipes from being exposed to the sun for a long time or being too cold, try not to lay exposed pipes or add insulation materials to the exposed places for packaging. In winter, the water in the pipes should be emptied at night.
4. Pay attention to cleaning
In a humid environment, it is easy to breed bacteria, which will have a certain impact on water quality. We can add fungicides to the circulation system to eliminate bacteria and algae and keep the water clean.
Post time: Sep-15-2023
